How To Remove Rubbermaid Wire Shelves

Removing Rubbermaid wire shelves can be a daunting task, especially if you’ve never done it before. But fear not, with a little bit of guidance, you can easily remove those pesky shelves and have your space looking the way you want it to in no time!

Step-by-Step Guide

Step 1: Empty the Shelves

The first step is to remove everything from the shelves. This will make it easier to remove the shelves and will prevent any items from falling off and breaking.

Step 2: Locate the Clips

Next, locate the clips that are holding the shelves in place. These clips are usually located on the underside of the shelf and can be easily identified by their U-shape.

Step 3: Release the Clips

Using a flathead screwdriver or pliers, gently release the clips by pushing them upwards. Be careful not to apply too much pressure as this can damage the clip or the shelf.

Step 4: Remove the Shelves

Once the clips have been released, gently lift the shelf out of place. If the shelf is stubborn, try wiggling it back and forth until it comes loose.

Top 10 Tips and Ideas

1. Use a rubber mallet to gently tap on the clips if they are stuck.
2. If you plan to reuse the shelves, be sure to keep the clips in a safe place.
3. Label the shelves if you plan to put them back in the same spot.
4. Consider using a level to ensure that your shelves are evenly spaced.
5. If you’re having trouble with the clips, try using a pair of needle-nose pliers.
6. Wear gloves to protect your hands from any sharp edges.
7. If you’re having trouble removing the shelves, try spraying some WD-40 on the clips to loosen them up.
8. Consider using a stud finder to ensure that your shelves are properly anchored.
9. Be sure to clean the shelves before putting them back in place.
10. If you’re unsure about removing the shelves, consider hiring a professional.

Pros and Cons

One of the biggest pros of removing Rubbermaid wire shelves is that it allows you to customize your space to your liking. Whether you’re looking to add new shelves or rearrange your existing ones, removing the old shelves is the first step.

On the downside, removing the shelves can be time-consuming and may require some elbow grease. Additionally, if you’re not careful, you can damage the shelves or the clips, which could render them unusable.

My Personal Review and Suggestion

As someone who has removed Rubbermaid wire shelves in the past, I can attest that it can be a bit of a hassle. However, with the right tools and a bit of patience, it’s definitely doable. My suggestion would be to take your time, be careful with the clips, and don’t be afraid to ask for help if needed.

Question & Answer / FAQs

Q: Can I reuse the clips?

A: Yes, you can reuse the clips as long as they are not damaged.

Q: Do I need any special tools to remove the shelves?

A: No, you don’t need any special tools. A flathead screwdriver or pliers should do the trick.

Q: Can I remove the shelves without emptying them first?

A: Technically, yes, but it’s not recommended. Removing the items from the shelves makes it easier to remove the shelves and prevents any items from falling off and breaking.